Search found 40 matches
- Tue Feb 13, 2024 12:09 pm
- Forum: MARKETPLACE
- Topic: FS: 2022 170 MONTAUK $49,985 in New Jersey
- Replies: 0
- Views: 1634
FS: 2022 170 MONTAUK $49,985 in New Jersey
For-sale: a 2022 170 MONTAUK with 115-HP engine and trailer for $49,985 in northern New Jersey. CONTACT: voice call to 201-926-8315: no text messages This 2022 170 MONTAUK is in showroom condition. It is stored in my heated garage. There are no cuts, scratches, tears, or damage of any kind. I have a...
- Tue Nov 07, 2023 2:25 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Legends to Instrument Panel
- Replies: 4
- Views: 1128
Re: Adding Legends to Instrument Panel
Your thoughtfull and extensive reply spelled out all the scenarios I thought of and more, and it doesn't seem there is an easy solution Even a new panel—if available—has its difficulties.
- Mon Nov 06, 2023 4:31 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Legends to Instrument Panel
- Replies: 4
- Views: 1128
Adding Legends to Instrument Panel
On my 2019 150 MONTAUK the black finish on the gauge and switch panel has faded. I can redo the black finish.
Q1: how to I repair the white lettering and the white border lines?
An all-black panel will not look great
Q1: how to I repair the white lettering and the white border lines?
An all-black panel will not look great
- Sat Aug 05, 2023 4:31 pm
- Forum: MARKETPLACE
- Topic: FS: 2020 190 Montauk $68,885 in Northern New Jersey
- Replies: 2
- Views: 2919
Re: FS: 2020 190 Montauk $68,885 in Northern New Jersey
SOLD SOLD SOLD
- Fri May 26, 2023 12:12 pm
- Forum: MARKETPLACE
- Topic: WTB: Montauk 190 with low hours on East Coast
- Replies: 2
- Views: 3407
Re: WTB: Montauk 190 with low hours on East Coast
[Contact the seller directly using the method specified by the seller to communicate with him.]
- Sun Apr 30, 2023 11:13 am
- Forum: MARKETPLACE
- Topic: FS: 2020 190 Montauk $68,885 in Northern New Jersey
- Replies: 2
- Views: 2919
- Sat Apr 22, 2023 2:28 pm
- Forum: MARKETPLACE
- Topic: FS: 2020 190 Montauk $68,885 in Northern New Jersey
- Replies: 2
- Views: 2919
FS: 2020 190 Montauk $68,885 in Northern New Jersey
For-sale 2020 190 MONTAUK with Mercury 150-HP (31-hours)--all in brand new condition--for $68,885 in Northern New Jersery CONTACT: 201-926-8315 This is a one owner boat and covered by factory warranty through 2026. The boat was just and just fully detailed and serviced and has full cushion package o...
- Tue Mar 21, 2023 4:54 pm
- Forum: MARKETPLACE
- Topic: FS: 150 SUPER SPORT Cover $225 in New Jersey
- Replies: 2
- Views: 5915
Re: FS: 150 SUPER SPORT Cover $225 in New Jersey
Sorry, S O L D !!!
- Fri Aug 12, 2022 2:42 pm
- Forum: MARKETPLACE
- Topic: FS: 2013 190 Montauk for $45,900 in New Jersey
- Replies: 1
- Views: 2452
Re: FS: 2013 190 Montauk for $45,900 in New Jersey
S O L D !!!!
- Fri Jun 17, 2022 5:07 pm
- Forum: MARKETPLACE
- Topic: FS: 2013 190 Montauk for $45,900 in New Jersey
- Replies: 1
- Views: 2452
FS: 2013 190 Montauk for $45,900 in New Jersey
For-sale: a 2013 190 MONTAUK with VERADO 150-HP for $45,900 in northern New Jersey. CONTACT: voice call to 201-926-8315 small 19 montauk 2.JPG This 190 MONTAUK was initially used in freshwater, then later relocated to Charleston, South Carolina. The VERADO 150-HP engine has Smartcraft gauges and ele...
- Thu Apr 28, 2022 12:15 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Raw water washdown 2013 190 Montauk
- Replies: 1
- Views: 487
Raw water washdown 2013 190 Montauk
Has anyone added a raw water washdown to their 190 Montauk. I have a 2013 190 Montauk with livewell and my search has not found any difinitive previous threads. Thoughts or advice very much appreciated.
- Thu Apr 14, 2022 4:18 pm
- Forum: MARKETPLACE
- Topic: FS: 150 SUPER SPORT Cover $225 in New Jersey
- Replies: 2
- Views: 5915
FS: 150 SUPER SPORT Cover $225 in New Jersey
For-sale: a used CARVER cover stock number 10353P GRAY that will fit a 150 SUPER SPORT for $225 in great condition in [New Jersey deduced from area code].
CONTACT: Ed 201-926-8315
CONTACT: Ed 201-926-8315
- Mon Dec 13, 2021 4:35 pm
- Forum: The GAM
- Topic: 2020 150 Montauk Fuel Tank Removal From Under Helm Seat
- Replies: 4
- Views: 2739
Re: 2020 150 Montauk Fuel Tank Removal From Under Helm Seat
Sits directly on deck, no mat. Strapped in underneath the helm seat.
- Fri Dec 03, 2021 3:39 pm
- Forum: The GAM
- Topic: 2020 150 Montauk Fuel Tank Removal From Under Helm Seat
- Replies: 4
- Views: 2739
2020 150 Montauk Fuel Tank Removal From Under Helm Seat
Give me a suggestion [for a method to reduced the difficulty to remove the fuel tank from under the helm seat on a 2020 150 MONTAUK boat]. Thanks. BACKSTORY [On my 2020 150 MONTAUK boat] in hot weather I have great difficulty getting out the 12-gallon fuel from under the helm seat. The problem is ex...
- Sun Oct 17, 2021 12:30 pm
- Forum: MARKETPLACE
- Topic: FS: 2018 170 Montauk $42,900 in New Jersey
- Replies: 0
- Views: 4894
FS: 2018 170 Montauk $42,900 in New Jersey
For-sale: a 2018 170 Montauk with [Mercury 115-HP FOURSTROKE COMMAND THRUST engine] with 128 hours and galvanized trailer for $42,900 in north Jersey, CONTACT : 201-926-8315 (no texts please) with questions. DSC075112018 170 montauk bow small.JPG This hull has never been stored in the water. The hul...
- Thu Jul 01, 2021 5:35 pm
- Forum: The GAM
- Topic: 170 MONTAUK Ride Improvement post-2018 Hull
- Replies: 5
- Views: 4296
170 MONTAUK Ride Improvement post-2018 Hull
To be answered only by persons with first-hand experience driving both the post-2018 170 MONTAUK and the 2002 to 2017 170 MONTAUK: is there any improvement in the ride due to the newer hull?
- Mon May 17, 2021 2:38 pm
- Forum: The GAM
- Topic: Where to Store Pole for White All-round Lamp
- Replies: 0
- Views: 6974
Where to Store Pole for White All-round Lamp
On a 1987 SUPER SPORT 15 where can the pole for white all-round lamp be stored not in use?
Where can two rubber mounts as used on 2021 170 Montauk boats be mounted with integrity?
Where can two rubber mounts as used on 2021 170 Montauk boats be mounted with integrity?
- Thu Apr 15, 2021 10:38 am
- Forum: PERFORMANCE
- Topic: How to Raise Engine Mounting Height
- Replies: 1
- Views: 3642
How to Raise Engine Mounting Height
What is the process used for raising mounting height?
Is forklift needed?
Is a hoist needed?
[Moderator's note: separated from another discussion on optimizing performance for a particular boat and engine.]
Is forklift needed?
Is a hoist needed?
[Moderator's note: separated from another discussion on optimizing performance for a particular boat and engine.]
- Wed Apr 14, 2021 4:47 pm
- Forum: PERFORMANCE
- Topic: Super Sport 15 Re-power 60-HP
- Replies: 7
- Views: 6421
Re: Super Sport 15 Re-power 60-HP
Thanks so much Phil. Is the Vengance a stainless prop, I was thinking aluminum.
Ed
Ed
- Wed Apr 14, 2021 1:48 pm
- Forum: PERFORMANCE
- Topic: Super Sport 15 Re-power 60-HP
- Replies: 7
- Views: 6421
Re: Super Sport 15 Re-power 60-HP
The engine weight is 247-lbs. Max rpm is 5500-6000. Gear ratio (standard gear case) is 1.83:1
- Thu Apr 08, 2021 2:52 pm
- Forum: PERFORMANCE
- Topic: Super Sport 15 Re-power 60-HP
- Replies: 7
- Views: 6421
Super Sport 15 Re-power 60-HP
My 1987 SUPER SPORT 15 has been re-powered with a [2021-production epoch Mercury] 60-HP engine.
What is the best engine mounting height?
What is the best propeller?
Should I buy an aluminum propeller?
What is the best engine mounting height?
What is the best propeller?
Should I buy an aluminum propeller?
- Fri Apr 02, 2021 7:26 am
- Forum: The GAM
- Topic: Engine Shaft Length, Weight, Cable Lengths, Propeller Selection, Cost of Modern Engines
- Replies: 17
- Views: 5501
Re: Engine Shaft Length, Weight, Cable Lengths, Propeller Selection, Cost of Modern Engines
Thanks DT. I am unlikely to get a jack plate.
- Tue Mar 30, 2021 1:51 pm
- Forum: The GAM
- Topic: Engine Shaft Length, Weight, Cable Lengths, Propeller Selection, Cost of Modern Engines
- Replies: 17
- Views: 5501
Re: Engine Shaft Length, Weight, Cable Lengths, Propeller Selection, Cost of Modern Engines
Great information and much appreciated.
- Tue Mar 30, 2021 11:15 am
- Forum: The GAM
- Topic: Engine Shaft Length, Weight, Cable Lengths, Propeller Selection, Cost of Modern Engines
- Replies: 17
- Views: 5501
Re: Engine Shaft Length, Weight, Cable Lengths
R Davis: What was the cost of your Tohatsu outboard engine?
- Mon Mar 29, 2021 2:18 pm
- Forum: The GAM
- Topic: Engine Shaft Length, Weight, Cable Lengths, Propeller Selection, Cost of Modern Engines
- Replies: 17
- Views: 5501
Engine Shaft Length, Weight, Cable Lengths, Propeller Selection, Cost of Modern Engines
[What is the] engine shaft length for a SUPER SPORT 15? [What is an appropriate maximum] engine weight for a SUPER SPORT 15? [What is the appropriate length] for a steering cable for a SUPER SPORT 15? BACKSTORY: just bought a 1987 Super Sport 15 with a hull in mint condition. [There is a] new interi...
- Mon Apr 01, 2019 5:01 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2009 150 SUPER SPORT: Brown Fluid Oozing
- Replies: 8
- Views: 7329
Re: 2009 150 SUPER SPORT: Brown Fluid Oozing
Thanks for the responses.
The boat was used in saltwater.
The mounting location is just above the bottom paint so not submerged at rest. I would assume it is submerged running off plane.
The boat was used in saltwater.
The mounting location is just above the bottom paint so not submerged at rest. I would assume it is submerged running off plane.
- Fri Mar 29, 2019 2:18 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2009 150 SUPER SPORT: Brown Fluid Oozing
- Replies: 8
- Views: 7329
2009 150 SUPER SPORT: Brown Fluid Oozing
I just bought an [2009--please always use four digits to indicate a year] 150 Super Sport. bolt.jpg Above is the lower left mounting bolt I sent this photo to the dealer that sold me the boat. The dealer said I should pull off the mounting bolt, clean, and reseal. I don't believe [the brown liquid] ...
- Sun Dec 16, 2018 3:08 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 170 Montauk: Identify Part Name
- Replies: 2
- Views: 3008
170 Montauk: Identify Part Name
What is the name of the part located on the bottom of the deck plate that covers the [sump] pump access [on a 2012 170 MONTAUK boat]? [The part to be identified] is a small pin with a ball at the end which fits into a receiver to hold the plate in place. Mine are bent over and need replacement. [Wha...
- Sun Mar 04, 2018 11:32 am
- Forum: The GAM
- Topic: 1999 11-footer Two-tone Deck Gelcoat
- Replies: 1
- Views: 2208
1999 11-footer Two-tone Deck Gelcoat
I am looking at purchasing a 1999 11' Whaler. It has a 2 tone deck which looks really nice in person. I was wondering if this was original to the boat or an available option.
See photo
Thanks!
See photo
Thanks!
- Tue Feb 20, 2018 2:44 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Problem with changing lower unit oil on Mercury outboard
- Replies: 2
- Views: 3107
Problem with changing lower unit oil on Mercury outboard
I have a 2014 Mercury four stroke 40 hp on my new to me 13 super sport. Just changed the gearcase oil for the first time. I have done this many times before but first time with this engine. Got engine in vertical position. The lower unit has typical drain fill plug and two top vent plugs. Started en...
- Tue Jan 17, 2017 4:34 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2005 170 Montauk: Instrument Panel and Switch Replacement
- Replies: 3
- Views: 3696
Re: 2005 170 Montauk: Instrument Panel and Switch Replacement
Thanks for the info gents!
- Sun Jan 15, 2017 3:07 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2005 170 Montauk: Instrument Panel and Switch Replacement
- Replies: 3
- Views: 3696
2005 170 Montauk: Instrument Panel and Switch Replacement
Hello. I am doing a complete detail and refurbishiment on a 2005 170 MONTAUK. I am considering replacing the instrument panel and the rocker switches. [Seeking] advice on sources for these parts and or experience with [their replacement]. Thanks!
- Fri Jan 13, 2017 10:20 am
- Forum: The GAM
- Topic: 2005 170 Montauk: Same Size Replacement Cooler
- Replies: 3
- Views: 5589
2005 170 Montauk: Same Size Replacement Cooler
I am looking for a new cooler for the front of the console for my 2005 17 0 Montauk. I would like to reuse the cushion and mounting brackets so I am looking for a same size replacement. The newer [Boston Whaler supplied coolers] have changed size. [Reply with your] thoughts [on a source for a same-s...
- Wed Jul 27, 2016 6:03 pm
- Forum: The GAM
- Topic: Yamaha Engine Reliability
- Replies: 3
- Views: 4016
Yamaha Engine Reliability
[This author is] considering the purchase of a 2000 13-footer with a 2004 Yamaha F40. The 2004 Yamaha F40 engine has carburetors. What is the reliability of the 2004 Yamaha F40 engine? Thanks.
- Wed Apr 13, 2016 10:43 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 230 Dauntless Replacement Windshield
- Replies: 2
- Views: 2816
230 Dauntless Replacement Windshield
I am buying a 2013 23 Dauntless. The previous owner cut the windshield way down so he could fit under a bridge leaving little for protection from spray. I would like to avoid buying a replacement at Boston Whaler pricing. Does anyone know if there is an aftermarket or custom made windshield availabl...
- Sun Apr 03, 2016 1:31 pm
- Forum: The GAM
- Topic: c.2013 230 Dauntless
- Replies: 8
- Views: 6399
Re: c.2013 230 Dauntless
Thanks guys, tough to find any owner info?
- Fri Apr 01, 2016 4:18 pm
- Forum: The GAM
- Topic: c.2013 230 Dauntless
- Replies: 8
- Views: 6399
Re: c.2013 230 Dauntless
Barnegat Bay and Atlantic ocean
- Fri Apr 01, 2016 1:16 pm
- Forum: The GAM
- Topic: c.2013 230 Dauntless
- Replies: 8
- Views: 6399
c.2013 230 Dauntless
I [may buy] a 2013 230 DAUNTLESS with a Verado 250 and T-top. I want an all-round boat for fishing, cruising, and water sports, to run mostly in the bay, but once in a while in the ocean. [Seeks advice from owners of this year and model Boston Whaler boat and offers] thanks in advance [for any infor...
- Tue Mar 15, 2016 10:05 am
- Forum: The GAM
- Topic: 2012 210 Montauk, Verado 200
- Replies: 4
- Views: 4192
2012 210 Montauk, Verado 200
I may buy a 2012 210 MONTAUK powered with a made-in-2012 Mercury 200-HP VERADO FOURSTROKE engine. I am hoping [readers can give me a] a reliability check for this engine. Also, I hope [readers can give me] any [of their] experience with this boat and engine combination. The 2012 210 MONTAUK boat wou...
- Wed Dec 30, 2015 8:41 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 13-footer: Fasteners in Seats
- Replies: 4
- Views: 4584
13-footer: Fasteners in Seats
On my 1984 Boston Whaler 13 the console has what looks like wood covers for screw heads or dowels. I want to take it apart for refinishing. Do I drill them out? What do I replace them with?
Thanks for your help!
Thanks for your help!