Search found 35 matches
- Tue Jul 06, 2021 6:59 pm
- Forum: MARKETPLACE
- Topic: FS 1965 16' 7" hull $1,250 in Wisconsin
- Replies: 1
- Views: 3456
FS 1965 16' 7" hull $1,250 in Wisconsin
For-sale: a 1965 16-foot hull for $1,250 near Milwaukee, Wisconsin. This item is the hull only but with a trailer with new tires. This 1965 16-foot hull is solid. The hull needs a terrible paint job sanded off. There are no chrome or wood components. This is a project boat at a starting point. CONTA...
- Sun Feb 03, 2019 10:05 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Whaler advice from jimh
- Replies: 1
- Views: 2747
Whaler advice from jimh
JimH - thank you for your contributions to this site and the thorough and detailed advice.
- Sun Jan 20, 2019 12:33 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Open or Closed Cell Foam in c.1979 Boat
- Replies: 18
- Views: 10705
Re: Open or Closed Cell Foam in c.1979 Boat
Another factor may be the "perm rating" or the amount of moisture that gets through or into the material. I have been told Boston Whaler foam is and always has been closed cell which should have a very high "perm rating" but the foam still holds water like a sponge if subjected t...
- Sat Dec 29, 2018 11:44 am
- Forum: MARKETPLACE
- Topic: FS: 1970 Nauset in Wisconsin; $5,000
- Replies: 0
- Views: 4509
FS: 1970 Nauset in Wisconsin; $5,000
I have FOR SALE for $5,000 a 1970 Nauset with a 1980 90 HP Johnson located in southern Wisconsin: ⋅ New Specialty Marine console and bench seat. ⋅ New motor controls and steering. ⋅ Ready to paint inside, then put together. ⋅ Engine tested by dealer. ⋅&nb...
- Sat Dec 29, 2018 11:20 am
- Forum: MARKETPLACE
- Topic: Request appraisal for 1969 Sakonnet
- Replies: 4
- Views: 4889
Re: Request appraisal for 1969 Sakonnet
I sold one with a similar description for $7,800 with the primary difference a complete new paint job and rub rail. One could argue I hurt the value with the paint vs. original gel coat. I have another one of similar description but a 1970 model year that I would gladly sell for $5,000. The 1970 nee...
- Sat May 19, 2018 2:04 pm
- Forum: MARKETPLACE
- Topic: FS - 1970 Nauset - Wisconsin
- Replies: 0
- Views: 2805
FS - 1970 Nauset - Wisconsin
I have a 1970 Nauset with a great 1982 Johnson 90 HP. $8,500 Trailer in good shape. New Specialty Marine Console and pilot seat - mahogany. New steering and binnacle control and battery and fuel tank Repainted blue interior with Epiphanes 2 part poly - Boston Whaler Blue. Dry hull with almost no typ...
- Wed Jan 24, 2018 6:34 pm
- Forum: MARKETPLACE
- Topic: 1966 Nauset RESTORED, For Sale
- Replies: 1
- Views: 3012
Re: 1966 Nauset RESTORED, For Sale
Sold for $8,250.
- Sun Dec 17, 2017 1:21 pm
- Forum: MARKETPLACE
- Topic: WTB 16' Nauset/Eastport 68-73
- Replies: 4
- Views: 3483
Re: WTB 16' Nauset/Eastport 68-73
Check with Mark at the same Dealership. He has one in Sister Bay, WI. May be for sale but VERY nice.
- Fri Dec 15, 2017 12:58 pm
- Forum: MARKETPLACE
- Topic: WTB 16' Nauset/Eastport 68-73
- Replies: 4
- Views: 3483
Re: WTB 16' Nauset/Eastport 68-73
Twin Cities Marine (now Beacon Marine) in Two Rivers, WI. has mine for sale - brokerage. Note that on mine the windshield was modified.
Call them or call me at 262 366-2242 if interested.
Everything was beautifully refinished, 1992, 75HP Mariner, low hours and totally serviced.
Call them or call me at 262 366-2242 if interested.
Everything was beautifully refinished, 1992, 75HP Mariner, low hours and totally serviced.
- Thu Oct 19, 2017 9:47 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1968 Nauset Foam Removal
- Replies: 15
- Views: 9068
Re: 1968 Nauset Foam Removal
Please keep the website going - it's one of the best visual, step by step, instructional presentations I have seen. With that said I'm not sure I'm ready to jump that deep into the process! Enjoy!
- Thu Sep 28, 2017 9:45 am
- Forum: MARKETPLACE
- Topic: For Free: Transom Riser for 13-footer
- Replies: 2
- Views: 3843
Re: For Free: Transom Riser for 13-footer
Sold to a good user
- Wed Sep 27, 2017 12:49 pm
- Forum: MARKETPLACE
- Topic: For Free: Transom Riser for 13-footer
- Replies: 2
- Views: 3843
For Free: Transom Riser for 13-footer
I have a free aluminum transom riser taken off a 1963 13 foot Whaler. Seems very heavy duty yet light for its strength. Has a few motor holes in it from prior installation. Text at 262 366-2242 if interested. MUST PAY SHIPPING AFTER YOU GET IT. Approx 15 1/2" wide, total 12" high.
- Sat Sep 16, 2017 6:57 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1970 NAUSET Gel Coat Repair
- Replies: 12
- Views: 7664
Re: 1970 NAUSET Gel Coat Repair
Very funny and a great outcome. That beer sure can cause some unintended consequences. Party on.
- Sat Sep 16, 2017 4:05 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2008 Montauk 170 Transom Support Using "transom saver device"
- Replies: 16
- Views: 10069
Re: 2008 Montauk 170 Transom Support Using "transom saver device"
Perhaps the recomendation for an extra motor support is not because the transom is too weak or the motor hydraulic ram is too weak but everyone is covering their you-know-what if their own product fails. It's the world we live in. I have been trailering outboards without the "belt and suspender...
- Tue Sep 05, 2017 11:28 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1970 NAUSET Gel Coat Repair
- Replies: 12
- Views: 7664
Re: 1970 NAUSET Gel Coat Repair
Jim knows best and I agree with him.. Your pictures show very minimal damage that would leak, through foam, etc. Plugs are probably loose. Seal fabric that is exposed with epoxy. The boats I have repaired have significant visible cracks/damage1
- Thu Aug 31, 2017 9:53 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1968 SPORT 13 Rub Rail Replacement
- Replies: 12
- Views: 9504
Re: 1968 SPORT 13 Rub Rail Replacement
The boats I have purchased (13-15 foot, 1965-1973) have riveted rub rails that have failed. It is VERY easy to pull out the remaining rivets. I re-instal with #10 pan head and 5200 giving more grip than just the fiberglass.
- Sun Aug 27, 2017 1:34 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1970 NAUSET Gel Coat Repair
- Replies: 12
- Views: 7664
Re: 1970 NAUSET Gel Coat Repair
I repaired a area [of two-square feet with] foam exposed on the bottom of a 13-footer using five layers of 6-ounce fiberglass cloth and epoxy resin. This seemed reasonable but excessive compared to Whaler's guide for structural repairs of "at least two layers" of 2 oz cloth. Why not make i...
- Sat Aug 26, 2017 8:23 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1970 NAUSET Gel Coat Repair
- Replies: 12
- Views: 7664
Re: Banged up gelcoat
I have completed two total restorations, 1966 and a 1975, both with all kinds of different fiberglass or gel coat damage. If only the gel coat is damaged you can sand off the gel coat to expose smooth and solid fiberglass and repaint or re gel coat. If the fiberglass is broken water can get into the...
- Mon Aug 21, 2017 8:21 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mercury 90-HP Aural Alert Sounds
- Replies: 19
- Views: 10972
Re: Mercury 90-HP Aural Alert Sounds
Thank you for your concise communication of your knowledge. I'm restoring my second [Boston Whaler boat] this summer, a SPORT that was made in 1975, taken out of service due to hull damage in 1977 and kept in a garage for 30 years--and best yet $500. I'm doing a complete restoration with the best ma...
- Mon Aug 21, 2017 2:50 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mercury 90-HP Aural Alert Sounds
- Replies: 19
- Views: 10972
Re: Mercury 90-HP Aural Alert Sounds
Invoice stated "Replaced oil warning module which was the cause of the alarm" and replaced "low oil sensor because the wires were corroded and gone". You could call Twin Cities Marine (Kris) for more detail - Paul's restored 1966 Nauset. Temperature sensor was tested and worked p...
- Mon Aug 21, 2017 9:31 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mercury 90-HP Aural Alert Sounds
- Replies: 19
- Views: 10972
Re: Mercury 90-HP Aural Alert Sounds
MY 1992 MARINER 75 HP had a continuous BEEEEEEEEEP that was an oil sensor problem even though the common belief is that a continuous BEEEEEEEEP is identifying a temp problem. It was definitely a sensor and not the alarm itself. Motor was still smoking normally during the very short run time during a...
- Sun Aug 20, 2017 8:19 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mercury 90-HP Aural Alert Sounds
- Replies: 19
- Views: 10972
Re: Mercury 90-HP Aural Alert Sounds
Jim,
Your input is ALWAYS helpful. I just went through all of this. Using your reference material I could direct and "coach" the mechanic and save some time/money! Problem solved. Can't expect a mechanic to be so logical, except a good one.
Your input is ALWAYS helpful. I just went through all of this. Using your reference material I could direct and "coach" the mechanic and save some time/money! Problem solved. Can't expect a mechanic to be so logical, except a good one.
- Sat Aug 12, 2017 5:52 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1973 Topside Paint Color 13 sport
- Replies: 3
- Views: 2712
Re: 1973 Topside Paint Color 13 sport
Thanks, You are correct, no paint. I will be doing 100% inside/out so exact match not important. Good point perhaps I try spraying gelcoat this time/this boat rather than 2 part poly. . Any stock "colors" that ate close, for example Interlux, Epiphanies, etc. I'm sure there is a link somew...
- Sat Aug 12, 2017 2:35 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1973 Topside Paint Color 13 sport
- Replies: 3
- Views: 2712
1973 Topside Paint Color 13 sport
Do the various manufacturers have "stock" colors that are a close match? Is the inside and outside the same - I can't tell?
- Fri Aug 04, 2017 6:33 pm
- Forum: MARKETPLACE
- Topic: SOLD: 25' BW Outrage WD project
- Replies: 5
- Views: 5294
Re: 25' BW Outrage WD project
Do you know if the hull foam is dry. Weight?
Paul
Paul
- Mon Jul 24, 2017 10:16 am
- Forum: MARKETPLACE
- Topic: Nauset, 1966, Full Restoration, WI
- Replies: 2
- Views: 3303
Re: Nauset, 1966, Full Restoration, WI
Windshield was modified, decal to be replaced with proper size and direction.
- Sat Jul 22, 2017 3:20 pm
- Forum: MARKETPLACE
- Topic: Nauset, 1966, Full Restoration, WI
- Replies: 2
- Views: 3303
Nauset, 1966, Full Restoration, WI
See Picture, 1992 75 HP Mariner, probably under 100 Hours.
Fresh Water.
$10,000.
Fresh Water.
$10,000.
- Tue Jul 18, 2017 8:38 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Nauset wet hull weight
- Replies: 8
- Views: 5802
Re: Nauset wet hull weight
What would be a "fair" price to sell this [1966 Nauset hull 35190]? I have never wanted anything but "fair" regardless of man-hours. As a home restoration contractor I have "fixed up and sold" in order to get to the next lifestyle pleasing project. I had the boat moving...
- Sat Jul 15, 2017 9:42 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Nauset wet hull weight
- Replies: 8
- Views: 5802
Re: Nauset wet hull weight
Oh no! - the decal is on backward! - For the purist note that the windshield was modified to tilt aft, not forward. Perhaps the backward decal is fitting. Good thing I can change it or live with it.
- Sat Jul 15, 2017 6:23 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Nauset wet hull weight
- Replies: 8
- Views: 5802
Re: Nauset wet hull weight
Thank you for the kind response. Some shots at the beginning - a boatload of parts and lots of learning as you go!
- Sat Jul 15, 2017 5:23 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Nauset wet hull weight
- Replies: 8
- Views: 5802
Re: Nauset wet hull weight
The restoration is complete and could not been done as well without this site! At least 80 hours on the hull and another 40 to strip the wood and apply 10 coats of finish!
- Wed Jul 12, 2017 8:17 pm
- Forum: The GAM
- Topic: NAUSET Hull Weight
- Replies: 2
- Views: 2887
Re: Nausett Hulls
My 1966 Nauset weighed 700-lbs-- hull only, no rails. The 1966 owner's manual says bare hull should be 500-lbs. Mine registered wet with a moisture meter at a Boston Whaler dealer. I did one-hundred-percent restoration anyway, finishing 99-percent today. The finished boat is beautiful. I spent at le...
- Mon Jun 26, 2017 6:53 pm
- Forum: MARKETPLACE
- Topic: 1966 Nauset RESTORED, For Sale
- Replies: 1
- Views: 3012
1966 Nauset RESTORED, For Sale
Asking $9,500. 1994 Mariner 75 HP (very low hours), great trailer, most importantly, great condition throughout.Milwaukee, WI area.
Hull 35190, bottom paint, all new paint, varnish near perfect. 262 - 366-2242 Paul
Hull 35190, bottom paint, all new paint, varnish near perfect. 262 - 366-2242 Paul
- Wed Jun 14, 2017 12:31 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Nauset wet hull weight
- Replies: 8
- Views: 5802
Re: Nauset wet hull weight
I have the 1966 sales literature that says the bare hull is 500-lbs.
- Wed Jun 14, 2017 11:55 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Nauset wet hull weight
- Replies: 8
- Views: 5802
Nauset wet hull weight
I accurately weighed the bare hull of my 1966 Nauset (hull 35190) and found it to be 700-lbs or 200-lbs pounds over specification. The boat floats high. I'm completing a 100-percent, detailed, and comprehensive restoration, regardless. New paint, new barrier coat, new varnish, new rub rail, new elec...