Search found 14 matches
- Tue Jun 04, 2019 12:20 am
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: Evinrude Part Numbers for Temperature Sensors
- Replies: 5
- Views: 14970
Re: Evinrude Part Numbers for Temperature Sensors
I bought a used Lowrance LMF-400 from a buddy [in order to be able to configure the Lowrance NMEA-2000 temperature sensors] because [the local Evinrude] dealer did not have [a Lowrance multi-function display to use to configure them]. To configure and heat-test all three sensors with the LMF-400 too...
- Mon May 20, 2019 10:01 pm
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: ICON 7.0 CTS Doesn't Show Fuel
- Replies: 29
- Views: 31954
Re: ICON 7.0 CTS Doesn't Show Fuel
The [analogue inputs on the Evinrude ICON 7.0 CTS] can also be used for oil along with the water tank levels you listed.
[Thanks for the emendation--I added it to the earlier mention above--jimh]
[Thanks for the emendation--I added it to the earlier mention above--jimh]
- Mon May 20, 2019 12:24 am
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: Evinrude Part Numbers for Temperature Sensors
- Replies: 5
- Views: 14970
Re: Evinrude Part Numbers for Temperature Sensors
After many phone calls to BRP technical services, I finally found somebody who knew how to configure these temperature sensors to [operate on the network with ] the ICON 7.0 CTS. EVDIAG will see the sensors on the network when installed, but it provides no way to configure them. You must use a Lowra...
- Mon May 20, 2019 12:15 am
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: ICON 7.0 CTS Doesn't Show Fuel
- Replies: 29
- Views: 31954
Re: ICON 7.0 CTS Doesn't Show Fuel
I made got to the dealer. [The dealer found the fuel tank level NMEA-2000 convertor, part number] 0768916, was bad. I had checked the resistive sending unit on the fuel tank; and the resistance readings were correct. I figured [the cause of all the problems] had to be a bad [NMEA tank level converto...
- Sat Apr 20, 2019 11:37 pm
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: Evinrude Part Numbers for Temperature Sensors
- Replies: 5
- Views: 14970
Re: ICON 7.0 CTS Doesn't Show Fuel
Evinrude has temperature sensors with part number 0764183 with the description “sea water kit w/tee." These sensors are used for water, air, and livewell temperature with ICON CTS displays.
- Sat Apr 20, 2019 11:33 pm
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: ICON 7.0 CTS Doesn't Show Fuel
- Replies: 29
- Views: 31954
Re: ICON 7.0 CTS Doesn't Show Fuel
I will report more once I can get to the dealer. If using [Evinrude ICON II EST PREMIUM] remote controls with either the [Evinrude ICON 7.0 CTS or ICON 4.3 CTS displays] the user can configure the [analog inputs of the ICON II PREMIUM EST remote controls to be used for] two fuel tanks and two oil ta...
- Fri Apr 19, 2019 1:46 pm
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: ICON 7.0 CTS Doesn't Show Fuel
- Replies: 29
- Views: 31954
Re: ICON 7.0 CTS Doesn't Show Fuel
I realize there is nothing wrong with the [ICON II BASIC EST Concealed Side Mount] controls. [Here I have deleted a long narration about the fluid tank level senders and displays that went over the same preconfigured INSTANCE settings that occur with certain Evinrude devices that have inputs for ana...
- Fri Apr 19, 2019 1:24 am
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: ICON 7.0 CTS Doesn't Show Fuel
- Replies: 29
- Views: 31954
Re: ICON 7.0 CTS Doesn't Show Fuel
There is power on [the] drop [cable that connects to the fluid level NMEA-2000 converter]. I hope [the fluid level NMEA-2000 convertor] just needs to be turned on [by using EV-Diagnostic Version 6 software]. The [Evinrude ICON 7.0 CTS] says those four inputs (two fuel and two oil) are sourced from t...
- Wed Apr 17, 2019 3:59 pm
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: ICON 7.0 CTS Doesn't Show Fuel
- Replies: 29
- Views: 31954
Re: ICON 7.0 CTS Doesn't Show Fuel
The only [NMEA-2000 network fluid tank level] sensor my [ICON 7.0 CTS] sees is the [under-cowling] engine oil tank.
- Tue Apr 16, 2019 9:43 pm
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: ICON 7.0 CTS Doesn't Show Fuel
- Replies: 29
- Views: 31954
Re: ICON Touch 7.0 Color Touch Screen Display
I have the [ICON II BASIC EST] control for G2. It does not have the four analog inputs for sure. I wish it did--that would be simple.
Do the numbers that are highlighted on my [tank level] network adapter matter in the INSTANCE setting? Or is it still INSTANCE=4?
Do the numbers that are highlighted on my [tank level] network adapter matter in the INSTANCE setting? Or is it still INSTANCE=4?
- Sun Apr 14, 2019 10:54 am
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: ICON 7.0 CTS Doesn't Show Fuel
- Replies: 29
- Views: 31954
Re: ICON Touch 7.0 Color Touch Screen Display
Yes, my dealer is great.
I just want to make sure we have all parts needed to fix the few problems I have when I make the three-hour drive to fix it. Thanks for your help
I just want to make sure we have all parts needed to fix the few problems I have when I make the three-hour drive to fix it. Thanks for your help
- Sun Apr 14, 2019 1:39 am
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: ICON 7.0 CTS Doesn't Show Fuel
- Replies: 29
- Views: 31954
Re: ICON Touch 7.0 Color Touch Screen Display
I just looked again at the network [device] that was connected to the [resistive] fluid tank level sensor; [the network device] does have a little [housing] (as I see on-line for part number 768916). [The network device] has a sticker with boxes highlighted "fuel" and "zero" and ...
- Sun Apr 14, 2019 1:15 am
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: ICON 7.0 CTS Doesn't Show Fuel
- Replies: 29
- Views: 31954
Re: ICON Touch 7.0 Color Touch Screen Display
That is a lot of information and I appreciate it. We’ll start with the concealed side mount. I believe i have part number 5010252 but the control box itself has part number 5009752 on a sticker. There is no fuel level gauge wire coming off of that box like the installation and pre delivery guide say...
- Fri Apr 12, 2019 11:27 pm
- Forum: EVINRUDE I-COMMAND, ICON Pro, ICON Touch
- Topic: ICON 7.0 CTS Doesn't Show Fuel
- Replies: 29
- Views: 31954
ICON 7.0 CTS Doesn't Show Fuel
Hello all. I am the proud new owner of a new Evinrude 200 H.O. G2 with the ICON 7.0 CTS or Color Touch Screen display. I have all the documentation for rigging. [The principal problem and focus of discussion of this thread:] My dealer hooked a fuel [tank level] sender to the network: It doesn't work...