Where can the angled upright bow rail stanchion fittings for a 1974 OUTRAGE 21 be purchased?
[Deleted sidebar question on another topic based on further comments from the OP; also deleted all replies on the sidebar topic.--Moderator]
BACK STORY
I have started work on my 1974 Outrage 21. I have stripped everything. The bow rail fittings which hold the upright stanchions have lost all their chrome. These fittings are the angled ones low on the bulwark, and the stanchions penetrate up through the deck. I could get them re-chromed. Specialty Marine does not have them.
1974 OUTRAGE 21 Bow Rail Fittings
-
- Posts: 20
- Joined: Tue Mar 15, 2022 10:24 am
- Location: Cumberland, Maine
Re: 1974 OUTRAGE 21 Bow Rail Fittings
Stay away from Specialty Marine. Their products are cr$p.
Re-chrome all hardware because there is no replacement available.
Several of my frieinds frequent Captain Jim's Marine Salvage on Presumpscott Street in Portland. It is just down the street from the new Hamilton Marine location.
Note you should practice your haggling skills. He's a bit of a character.
Re-chrome all hardware because there is no replacement available.
Several of my frieinds frequent Captain Jim's Marine Salvage on Presumpscott Street in Portland. It is just down the street from the new Hamilton Marine location.
Note you should practice your haggling skills. He's a bit of a character.
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
-
- Posts: 20
- Joined: Tue Mar 15, 2022 10:24 am
- Location: Cumberland, Maine
Re: 1974 OUTRAGE 21 Bow Rail Fittings
I have heard Captain Jim's Marine Salvage is closing.
I have found a place to get the bow railing fittings re-chromed in Connecticut--off they go.
Thanks--Steve in Maine
I have found a place to get the bow railing fittings re-chromed in Connecticut--off they go.
Thanks--Steve in Maine