Hull Bottom Barrier Coat Product
Posted: Wed Apr 24, 2024 6:51 pm
I plan to use WEST System epoxy to make the repair to the gel coat resin on my 1989 MONTAUK [unspecified length], then use Petit Protect for the barrier coat.
Q1: can Petit Protect be applied over epoxy?
Q2: how long should the hull be allowed to dry before the barrier coat is applied?
ASIDE:
I had the hull bottom of my 1989 MONTAUK [unspecified length] blasted on April 24, 2024 with a "slurry recycled glass" medium to remove the bottom paint.
There are some chips in the gel coat along the chines, including two big ones, that need repair before I apply a barrier coat and anti-fouling paint
Q1: can Petit Protect be applied over epoxy?
Q2: how long should the hull be allowed to dry before the barrier coat is applied?
ASIDE:
I had the hull bottom of my 1989 MONTAUK [unspecified length] blasted on April 24, 2024 with a "slurry recycled glass" medium to remove the bottom paint.
There are some chips in the gel coat along the chines, including two big ones, that need repair before I apply a barrier coat and anti-fouling paint