Which Cooler
Posted: Fri Apr 14, 2017 6:03 pm
I have a 1989 Outrage 18 with cooler chocks 28.5-inch apart. I read and re-read on the site, but nothing specific talks about measurement at the base of the cooler. Let me say that I neither trust that the chocks are properly placed or original.
This afternoon I went to West Marine and measured the 72-quart [cooler] which is just over 29.5-inch, a tad too long. I would like to not move the chocks if at all possible, but I'm getting to the point where it would be the easiest thing to do.
I did read that the 72-quart [cooler] is narrow with the crook in the middle, so if I'm going to move the chocks, maybe I should go to the 94-quart [cooler]. Then I worry about someone stubbing their toe on the wooden chocks.
So I turn to those who have gone before me and ask, what's the best thing to do here?
Thanks to all in advance,
PK
This afternoon I went to West Marine and measured the 72-quart [cooler] which is just over 29.5-inch, a tad too long. I would like to not move the chocks if at all possible, but I'm getting to the point where it would be the easiest thing to do.
I did read that the 72-quart [cooler] is narrow with the crook in the middle, so if I'm going to move the chocks, maybe I should go to the 94-quart [cooler]. Then I worry about someone stubbing their toe on the wooden chocks.
So I turn to those who have gone before me and ask, what's the best thing to do here?
Thanks to all in advance,
PK