CONTINUOUSWAVE

We have a 2010 Montauk 150 with the centre console, which has an tiltable seat back which pivots at the bottom on a acetal fitting which bolts to the fibreglass side of the seat. On one side this acetal/delrin piece has cracked apart - I'm wondering if this is sold as a BW spare part? - it's not very well designed, as the pressure on this part is hard to adjust, the part jammed in the back position, then cracked when the seat-back was moved forward. I can make this myself from delrin, but would prefer a real BW part if it's available?
Richard in Los Angeles

Yes, it might be available. You can go to whalerparts.com and look at the part break-out for your year and model. The RPS (reversible pilot seat) has its own part break-out. The first page should be the schematic for your model and year RPS. Match the schematic part number 1,2,3, to the listing on page 3 to find the BW part number that is orderable from a dealer: http://whalerparts.com/Diagrams/2010/15 ... 1150MT.pdf