Template for Reporting Performance Data
Posted: Thu Jul 31, 2025 11:45 am
When reporting performance data, the following template may be useful in composing the report:
BOAT INFORMATION:
ENGINE INFORMATION:
PROPELLER INFORMATION:
ENVIRONMENTAL INFORMATION:
INSTRUMENTATION:
DATA recorded:
DATA calculated:
COMMENTS
Any observations that could affect the results, such as amount of fuel on board, number of people, amount of gear, canvas stowed or deployed, etc.
Example:two adults aboard, half-full fuel tank, minimal gear, Bimini stowed in upright position.
BOAT INFORMATION:
- Year
- Family
- Model (length)
- Transom configuration
- estimated total boat weight
ENGINE INFORMATION:
- Model Year or Production Epoch
- Manufacturer
- HP
- Shaft length
- Gear Ratio
- Engine mounting height expressed in holes-raised-above-lowest-possible-position
- Full model code identifier
- Optimum full-throttle engine speed RPM range
- Maximum engine speed ROM
PROPELLER INFORMATION:
- Brand
- Model
- number of blades
- material
- diameter
- pitch
- particulars
ENVIRONMENTAL INFORMATION:
- Water temperature
- Water salinity
- Air temperature
- Air relative humidity
- Wind speed and relative direction to course
- Wave height
- Water current and relative direction to course
INSTRUMENTATION:
- Engine speed measurement source, unit of speed used, and estimated resolution
- Boat speed measurement source for RPM and estimated resolution.
DATA recorded:
- engine speed RPM
- boat speed in specific units where MPH in statute miles per hour in highly preferred and units in nautical miles per hours is an discouraged alternative
- particulars
DATA calculated:
- SLIP
- Fuel economy
COMMENTS
Any observations that could affect the results, such as amount of fuel on board, number of people, amount of gear, canvas stowed or deployed, etc.
Example:two adults aboard, half-full fuel tank, minimal gear, Bimini stowed in upright position.